Here are the tools and step i’m using it to install this

1. Its better to have drawing project so when buying the tools needed we know how much we need and it useful when we start cutting it. We can modify later when we start cutting and assemble it
   

   drawing draft of outdoor shower

2. Prepare all the tools needed. Pipe, glue, connector, saw
   

   part to assemble potable shower

3. Start cutting based on drawing, or ask hardware to cut it for you
4. Try to put all tools together to have picture of it
   

   shower match of each part

5. Try to make early fitting by assemble it first without glue. Its important because once its glue we cannot dissemble back unless cut it
6. Assemble and glue it
7. Let it dry for few hours
8. Testing new portable outdoor shower and have fun
   

   testing new portable outdoor shower

    

Here are some another DIY post you maybe interested

The post DIY Install Outdoor Portable Shower appeared first on MalaysiaSky.

1.  Using the led strip connector
   • If using led strip connector, it will be easier and cheaper but the constraint is led pin itself, If its 2 pin, you need to buy 2 pin connector, and if 4 pin, you need to buy 4 pin connector.
     

     sample 2 pin connector led strip. Photo taken from google.com

2. Using solder
   • Using solder a bit danger since the tools itself is hot but this is simple job only. Just make sure to careful and no kids surrounding.
   • I bought new set of this tools, bit costly but we use for other purpose too later

These are how I fix my tear off led strip using solder

• get a correct tool. Bought it at Lazada
  

  magic tool aka solder set

  

  tear off led strip.

• cut strip and make sure terminal is easy to solder
  

  peel a bit to make sure terminal is easy to solder later.

• solder it
  

  tap and solder it

• install back and test
  

  successfully solder on first try

• 

  the room will get light back

   

Here are some post related to DIY post might be interested you

The post How to fix broken LED strip using solder appeared first on MalaysiaSky.

air condition unit to DIY with spray foam

This simple DIY aircond care cleaning maintenance is to maintain our unit to make sure it always on top performance before we do regular cleaning service, we can do by ourselves for this kind of easy job. I always do it regularly 2-3 months time before i call air condition technician for yearly maintenance which will disassemble blower fan and cleaning it properly. So our air condition unit always dust free , under good care and serve freshness.

To do it, only few step require. Only require clothes and air condition cleaner spray which you can buy in your local or hardware store. In my case i bought at Mr. DIY store. The price is less than RM20 last time i bought few years back. Yes one bottle can last long to do this aircond care cleaning maintenance multiple times.

1. Open air condition unit cover
   

   pop to open the air condition cover

2. Check the filter either need to wash or not
   

   open the air condition cover

3. Remove the air condition unit filter
   

   remove filter from air condition

4. Wash the filter
   

   air condition filter before and after wash. Dry it

5. Spray air condition coil with air condition cleaner. Wait around 5 minutes . Instruction to use the spray usually at the back of the spray bottle. Just shake it well and spray.
   

   air condition cleaner spray

   

   spray air condition coil. See the spray foam

6. Install back filter into air condition unit
   

   install back filter after 4-5 minutes spray. Make sure the filter is dry enough

7. Turn on air condition unit back and run it at least 15 minutes to make sure all dirt will washed away together with spray foam
8. Thats it. So simple

That is the simple air condition maintenance care you can do by yourself. Your unit will stay for last longer and will reduce pipe blocking. If you using inverter  type air conditioner with ionize function, please make sure remove the ionizer filter first because as per told by technician, if the filter is wet, the ionizer  will not function anymore.

There also another DIY project i did. You can check here

The post Simple Aircond Care Cleaning Maintenance appeared first on MalaysiaSky.

I use paint scrapper to remove all the rubber wheel. This the only tool i need.

the rubber wheel that cause black mark on the floor

remove rubber wheel using scrapper

progress- rubber wheel removing

progress- rubber wheel removing half way

part of rubber removed

completely remove rubber wheel

The process to remove this rubber wheel from KK8 vacuum require around 15 minutes. After all are removed, doing some test run, and the great thing it still can walk ,i mean rolling. But its bit slippery and can notice it cant rolling over carpet anymore. Just on floor. But its ok for me as long as it can help me with the sweeping work.

Update. Over time the battery has worn and only can work in less time when full charged. After taking consideration, i purchased new vacuum robot to help me for household work

The post KK8 Robot Vacuum rubber Wheel appeared first on MalaysiaSky.

post renovation paint you can DIY How To Save Cost After Renovation Or Before Entering New House.

Entering new house can be a headache because the cost. But you can save a bit by doing some easy thing by yourself. Here are few DIY to save cost after renovation or before entering new house

1. If you buy sub-sale property, the house might need re paint. its the easiest job . Just buy paint, ladder, brush, glove and here you go. you will save a lot in term of painting labor. Unless you cant reach ceiling( in case ceiling too high) or paint external for 2nd storey house and more. Just hire painter to do the job you cant do. And to keep you safe for the certain high you cant reach
2. Change tap . Another easy job, just need spanar pipe and pipe tape. Rotate left rotate right and you done. I think everyone can do this unless require some hacking in the wall for more complicated thing
3. Laminate floor using vinyl. If the room just only cement, you can install this type of vinyl floor. A lot of design with variety price at the market now. With sticker or without sticker(need to buy glue separately) .You can save a lot compare to install tiles. You even can do with close eyes. And your floor will look nicer and beautiful. When you boring with the design few years later, just change it. Very easy
4. Clean the house yourself. Swiping , mopping, swiping again, its tiring but worth it. You can called it exercise too
5. Change the bulb. Another easy job. Just need the ladder. And the bulb. You will done in few minutes

But if you have no budget constraint or have a lot of money, just hire people to do all this job.  You can focus on other thing.

There also few diy post  you can do by yourself you might want to read.

The post DIY How To Save Cost After Renovation Or Before Entering New House. appeared first on MalaysiaSky.